The challenge was to find the mass of a meter stick only using a table, a 100g weight, and the meter stick itself.
The first step was to get the meter stick to balance on the edge of the table while the 100g weight was on one end This looked something like the image below.
To balance the stick we had to create a clock-wise torque that was equal to the counter clock-wise torque. Because torque = force x lever arm we had to find the force of the end of the stick with the weight.
Because we know that weight = mass x gravity we plugged that in to get the equation
weight = 100 x 9.8 = 980
And at this time the length of the lever arm was 30 cm on the left side, and was 20 cm on the right because it extended to the center of gravity on the meter stick.
Now that we have this we can plug in our equation:
980 x 30 = X x 20
After solving this equation we discover that the meter stick has a mass of 1470 and we then convert this into grams by simply moving the decimal point to the left. this leaves us with 147 grams.
Wednesday, February 4, 2015
Unit Summary #4
We started this unit with the concept of Rotational Inertia. Before we explain what Rotational Inertia is lets have a refresher of what inertia alone is.
Inertia = the property of an object to resist changes in motion
Now that we have been reminded of what inertia is, lets look at Rotational inertia.
Rotational Inertia = the property of an object to resist changes in spin
One factor that has a great impact on rotational inertia is the location of mass. For example:
When the mass is placed closer to the axis of rotation it is easier to rotate
Conservation Of Angular Momentum
Conservation of angular momentum (otherwise known and rotational momentum) states that the angular momentum before is equal to the angular momentum after. But what is angular momentum?
Angular momentum = rotational inertia x rotational velocity
Here is a video that my group made explaining this concept.
Tangential and Rotational Velocity
Have you ever wondered how trains stay on the tracks when they take a curve? No, you haven't? Well to bad, you're going to learn about it anyways. There are two major factors that keep the train on the tracks: Rotational Velocity, and Tangential Velocity.
Rotational Velocity = how fast something rotates around its axis of rotation.
Tangential Velocity = How fast something would be moving it were traveling in a straight path.
Take a look at this photo. Do you see how the wheels are connected by the axle and do not rotate independently. Also notice how the wheels are shaped. How they taper, being wider on the inside and smaller on the outside.
Because the wheels are connected by an axle, they have the same rotational velocity. however, different parts of the wheels have different tangential velocities.
The parts of the wheel that are wider have so spin faster (thus having a greater rotational velocity) in order to keep of with the skinny parts of the wheels who do not have to go as fast to have the same rotational velocity.
So when the train comes into a curve, one side has its wheels touching the tracks with only its slower spinning narrow portion. And the other has its wider and faster spinning parts of the wheels touching the track. What this causes is the wheels that are on the side of the train spin faster, and push the train back into the center of the tracks.
Torque
Torque is a force that causes an object to rotate. In case you did not know, when you fall over you are actually rotating and this is all about torque. But what is torque?
Torque = Force x Lever Arm
What this equation tells us is that you can achieve a large torque either by a large force, or by a large lever arm.
When you are trying to rotate a difficult bolt with a wrench. You are already applying as much force as you can so what can you do to generate more torque? If you said lengthen the lever arm then you are correct. Because we know that torque = force x lever arm we can increase the torque on the bolt by adding a pipe to the end of the wrench, or by getting a longer wrench.
Another thing torque is responsible for is balance.
Balance is achieved when the counter-clockwise torque = the clockwise torque.
Because torque can be hanged by either force or lever arm, the forces nor lever arms have to be equal in order to balance. All that is required is that their product on each side of the axis of rotation are equal to each other.
Center of Mass
Center of mass = average position of all an objects mass. Also called the center of gravity, the center of mass is very important when it comes to things falling over or not falling over. For something to fall over, it must have its center of mass outside of its base of support.
When a person is standing as this man in the picture is, they do not have a very wide base of support meaning that they would not have to rotate very far in order to place their center of gravity outside of their base of support.
A famous example of this is the leaning tower of Pisa.
.
As we can see. The tower is leaning a great amount, however it is not falling over because it still has its center of mass inside of its base of support.
Thursday, January 22, 2015
Right here is a rime example of Torque. this is some good science stuff right here!
I'm just kidding here is the real torque video, enjoy.
I think this video is useful because it shows an important distinction between force and torque. Torque is what it takes to rotate an object.
There is only one center of gravity in each object. Before we know the actual location of the center of gravity we know for certain that it is within the base of support. The center of gravity does not even have to be actually touching the object it can be in empty space.
This unit was all about Sire Issac Newton's third law and momentum.
Newton's 3rd law states that: For every action, there is an equal and opposite reaction.
Firstly we will start with the concept of action and reaction pairs.
Action Reaction Pairs are when a force is being applied to something and then that force is returned because Newton's Third Law tells us that for every action there is an equal and opposite reaction.
In this example we have a horse pulling a buggy, and the corresponding vectors.
The "pink" vectors show that the horse is pushing on the ground, and that the ground is pushing back on the horse with an equal and opposite force.
The grey vectors show that the buggy is pushing on the ground, and that the ground is pushing back with an equal and opposite force.
The "orange" vectors show that that the horse and the buggy are both pulling on each other with equal forces.
Ok, so why does the buggy move in the direction of the horse if they are pulling on each other with equal force? This happens because the force that the horse is pushing on the ground with and the return force that the ground pushes the horse with, is greater than the forces between the buggy and the ground.
We can tell that the forces between the horse and the ground are greater than that of the forces of the buggy and the ground by measuring the vectors of each.
Have you ever stopped to consider what is happening between that book sitting on the table over there? Whats that, you haven't? Well lucky for you I'm about to tell you. lets look at this example.
Here we see that the book is at rest on the table, and that the table itself is also at rest.
In this example we have two action reaction pairs.
FIRST: the book is is pushing down on the table. And the table is pushing back with an equal force on the book.
SECOND: the table is being pulled down by the earth, and the earth is being pulled up by the table.
Next up we will talk about tides and what causes them.
Tides are the movement of the oceans water over the face of the earth.
Tides are caused by the Difference in forces felt by the opposite sides of the earth.
The moon is the most important factor in causing the tides. Although it is much, much, much, smaller than the sun, we know that it has a greater gravitational force on the earth than the sun. we know this because the Universal Gravitational Equation:
.
What that shows is that distance is much more important than size when it comes to gravitational pull.
What we see here is the location of the moon during spring and neap tides.
The spring tide occurs when the moon, earth, and sun all line up together . and since the tides are caused by the difference in forces between opposite sides of the earth, this causes a greater force to be implied. Thus the tides are the most extreme highs and lows that they will be.
When the moon is at a 90 degree angle from the earth and the sun, we experience what are called neap tides. These are the least extreme highs and lows of the tides that occur.
Next is the concept of momentum. Momentum is represented by "P" and the equation for momentum is P=mv. What this means is that momentum equals the mass of the object multiplied by the velocity.
Just like everything else, momentum has laws that is must follow. One of these is that momentum is conserved. What this looks like is that
P-before = P-after
Finally we have impulse which is represented by "J" . Impulse equals the change in momentum. And impulse equals force multiplied by the change in time
J= F x t
And change in momentum looks like: P= P-final - P-initial
We use impulse to tell how great the force of something like an impact is .
Tuesday, November 18, 2014
Tides
This is an extreme example of tides called a Bore tide. This takes place in Alaska and is such a unique tide that it creates a visible wave that can even be rode into shore.
This is not by any means a normal tide. But what are tides and why do we have them?
Tides are the movement of the oceans water in a rising and falling pattern. The tides are caused n the difference of forces between opposite sides of the earth relative to the moon's gravitational pull.
The difference in the forces is caused by the distance from one side of the earth to the other. what this causes is tidal bulges that form on the sides closest and furthest from the moon, and leave the sides in the middle with the most average tide. When the moon is either lined up directly with the sun or is directly opposite the sun relative to earth we get what is called spring tides. when the moon is and a ninety degree angle to the earth and sun, we experience neap tides.
This is the tide chart for Panama City, Florida.
Right now, the beach is at a low tide
Panama City, St. Andrew Bay, Florida
30.1517° N, 85.6667° W
2014-11-17 6:09 AM CST Sunrise
2014-11-17 10:45 AM CST 0.57 feet Low Tide
2014-11-17 4:45 PM CST Sunset
2014-11-17 7:58 PM CST 0.94 feet High Tide
2014-11-18 5:48 AM CST 0.44 feet Low Tide
2014-11-18 6:10 AM CST Sunrise
2014-11-18 4:44 PM CST Sunset
2014-11-18 7:54 PM CST 1.08 feet High Tide
2014-11-19 5:59 AM CST 0.27 feet Low Tide
2014-11-19 6:11 AM CST Sunrise
2014-11-19 4:44 PM CST Sunset
2014-11-19 8:08 PM CST 1.21 feet High Tide
2014-11-20 6:12 AM CST Sunrise
2014-11-20 6:28 AM CST 0.10 feet Low Tide
2014-11-20 4:44 PM CST Sunset
2014-11-20 8:33 PM CST 1.35 feet High Tide
2014-11-21 6:13 AM CST Sunrise
During this second unit, we continued to discuss, learn about and base our work on the laws of Sir Issac Newton. The law that we learned about and worked on during this unit was Newton's second law.
Newtons second law states that: Acceleration is directly proportional to force, and acceleration is inversely proportional to mass. What this looks like as a formula is a = F x 1/m or a = F/m a = acceleration F = force m = mass
When we say that acceleration is directly proportional to force, what that means is that as an objects acceleration increases so to does the objects force. And as the objects acceleration decreases so to does the objects force decrease. acceleration (increase) = Force (increase) acceleration (decrease) = Force (decrease)
The other portion of the law says that acceleration is inversely proportional to mass. What this means is that as the mass of an object increases the acceleration of the object will decrease. And as the mass of the object decreases the acceleration of the object will increase. mass (increase) = acceleration (decrease) mass (decrease) = acceleration (increase)
We tested this law with an experiment in class using a rolling cart, and hanging weight, and changing the locations of the mass of the system, and recorded the changes in the acceleration of the system. Notice how I said that we changed the locations of the mass of the system? This is important to note because throughout the experiment we were moving weights around to different locations on the system, but the net weight of the system remained the same throughout.
[ ] = = = &
cart^ weights^ hanging weight^
for the first run we had all of the weights on the cart and none on the hanging weight. This resulted in a minimal acceleration because the mass of the cart was great, and Newton's third law tells us that mass and acceleration are inversely proportional.
run 1.) [===]-------
&
For the second run we placed one of the weights on the hanging weight. What this caused was a greater acceleration than in the previous run. This is because the the net weight of the system remained constant but the location of the weights caused the hanging weight to accelerate more than the time before resulting in a greater acceleration of the cart.
run 2.) [== ]------
=
&
Runs 3 and 4 also saw that the cart's acceleration continued to become greater every time the weights were transferred to the hanging weight.
run.3.) [ = ]------
==
&
run 4.) [ ]------
===
&
Next is the concept of free fall. In Free fall:
* the acceleration is 9.8m/s^2 in real life, or 10m/s^2 in the lab. what this means is that the object that is experiencing free fall will accelerate 9.8m/s^2 faster that it was the second before.
Similar to free fall, falling through the air also has an acceleration of 9.8m/s^2. However in falling through the air the object is subjected to air resistance. What this air resistance produces is something called a terminal velocity.
* Terminal Velocity is when an object is falling at the fastest speed possible and has an Fnet of 0 meaning that the force of gravity pulling the object down is equal to the force of air resistance against the object. The amount of air resistance on an object depends on the mass, surface area, and speed of the object. If any one of those variables changes, then the object's speed will have to adjust to the new terminal velocity.
When throwing things at an angle, the only thing that determines the hang time of the object is the vertical distance. and to find this vertical distance we use the formula
d=1/2g(t)^2
Friday, November 7, 2014
I really liked this video because it helped me understand Newton's Third law in the context of football. I had actually been struggling with the concept in this setting and this video cleared many things up.